Sticky-Grid-N-Tear™

Pellon® Sticky-Grid-N-Tear™ is a pressure sensitive tear-away embroidery stabilizer that has grid lines for stitch support, making it ideal for stamped cross stitch. It is extremely easy to use — just peel off the paper backing and apply to the fabric. Upon completion of the design, simply tear away the excess stabilizer.

  • 201G14 has 14 grid lines per inch for stitch support, making it ideal for counted cross stitch.
  • 201G1 has 1″ grid lines for stitch support, making it ideal for stamped cross stitch.
  • White
  • 60% Viscose / 40% Polyester
  • Packaged size: 11″ x 2 yards
  • Pressure-sensitive, tear-away embroidery stabilizer
  • 1” grid lines 
  • Sewing machine safe
  • Machine wash warm, delicate cycle. Do NOT use fabric softener. Tumble dry low of dry clean.

Details

General Directions:

1. Cut a piece of Sticky-Grid-N-Tear™ slightly larger than the area to be stitched.
2. Hoop the Sticky-Grid-N-Tear™ with the paper side up. Using a pin or craft knife, carefully score the paper and peel away from the stabilizer.
3. Lightly finger press fabric over the hoop keeping the grain line straight. Use the grid lines as a guide.
4. Embroider your design.
5. After design is complete, gently tear away the excess stabilizer.

Pellon logo