SF101 Shape-Flex®

SF101 Shape-Flex is an all purpose woven fusible interfacing.  It provides crisp support for collars, cuffs, yokes, pockets, facings and other detail areas of a garment. It can also add body and permanent stability when used as a backing for needlework and punch embroidery.

Shape-Flex® is intended for light to medium woven and knit fabrics, including oxford cloth, chambray, gingham, madras, tattersall, pincord, flannel, polyester/cotton blends.

  • Machine wash warm. Tumble dry medium, or dry clean.
  • Iron at wool/steam setting.
  • Available in both White and Black.
  • 100% Cotton
  • 20″ by-the-yard width OR packaged with convenient put-up of 15″ x 2 yards

Step 1: Place Fusible side of Shape-Flex® against the wrong side of the fabric. Pin in place, then steam-baste along edges with tip of iron. Remove pins.

Step 2: Cover with a damp press cloth. With iron at wool/steam setting, press firmly for a full 10 seconds. Repeat, lifting and slightly overlapping iron until all interfacing is fused. We recommend using a steam iron with a metal sole plate. Hand-held steamers will not permanently bond the interfacing to fabric


Related Pellon Projects

Pellon logo